When a storefront glass door shatters, an automatic sensor operator fails, or a warehouse steel man door refuses to lock, your business security and customer accessibility are instantly on the line. As the premier commercial door company San Diego facility directors rely on, our certified technicians deploy within 45 minutes with fully stocked mobile units to complete same-day hardware adjustments, closer rebuilds, and structural entryway restorations across San Diego County.
From high-traffic retail storefronts in Mission Valley to heavy industrial loading docks in Otay Mesa, commercial doors face continuous cycle wear, coastal salt exposure, and code compliance pressures.
We provide full-spectrum maintenance, emergency diagnostics, and precision installations for institutional, commercial, industrial, and retail facilities throughout Southern California.
From aluminum storefront door repair to glass storefront door replacement, we realign sagging door leaves, replace broken dual-pane safety glass, and rebuild concealed overhead Jackson and LCN closers.
Fix Storefront Doors
We reinforce commercial steel doors, repair bent hollow metal door frames, weld rusted jambs, and install heavy-duty continuous geared hinges for high-security rear exits and utility rooms.
Service Metal Doors
AAADM-certified technicians repair automatic sliding doors, motion sensor arrays, drive belts, guide rollers, control motherboards, and handicap push-button access operators for retail stores and healthcare clinics.
Repair Automatic Doors
Ensure life-safety compliance with annual fire door drop testing, magnetic hold-open checks, smoke seal gasketing, positive-latching calibration, and 20-minute to 3-hour fire-rated door assemblies.
Schedule Fire Door Test
Eliminate door slamming and latching failures. We service commercial panic exit devices, vertical rod assemblies, Grade 1 lever sets, mortise deadbolts, and ADA-compliant hydraulic closers.
Tune Door Hardware
Fast turnaround on commercial garage door repair, overhead sectional doors, broken torsion spring replacement, bent track realignments, industrial rolling steel shutters, and dock leveler seals.
Service Bay DoorsEngineered for maximum speed, security restoration, and full adherence to California Title 24 and ADA standards.
Our mobile commercial van arrives with an inventory of Grade 1 closers, continuous hinges, pivot sets, and security cylinders.
We check frame plumb, floor clearance, hinge deflection, latch alignment, and measure door opening resistance against ADA specs.
Technicians weld cracked frames, rebuild failing hydraulic closers, hang replacement pivot hinges, or install new tempered glass panels.
Closing speed, latch sweep, and push-pull force are calibrated to under 5 lbs of pressure to meet California Building Code (CBC) mandates.
You receive complete diagnostic documentation, a written preventative maintenance plan, and full warranty coverage on parts and labor.
Clear, transparent pricing ranges for facility managers, property managers, and commercial building owners across San Diego County.
| Service Category | Typical Issue & Scope | Estimated Cost Range & Turnaround |
|---|---|---|
| Commercial Door Closer Repair | Leaking hydraulic fluid, door slamming, failure to latch, loose closer arms | $175 – $425 (Same-day service, 1–2 hours) |
| Storefront Pivot & Hinge Repair | Sagging glass door, bottom corner rubbing threshold, damaged pivot pin | $220 – $480 (Same-day service, 2 hours) |
| Panic Exit Bar & Locksets | Jammed exit device, broken dogging mechanism, rekeying mortise cylinder | $295 – $750 (Same-day service, 1–3 hours) |
| Storefront Glass Replacement | Vandalism, cracked tempered or laminated safety glass, seal degradation | $450 – $1,250+ (Emergency board-up + 24–48 hr glass install) |
| Complete Door Replacement | Severely buckled steel frame, extensive rust rot, complete entry remodeling | $1,400 – $3,800+ (Custom fabrication + professional installation) |
Our service vehicles patrol main arteries including I-5, I-8, I-15, I-805, and SR-52 for rapid emergency dispatch.
Zip Codes: 92101, 92102, 92103, 92104, 92108, 92116
Downtown San Diego, Gaslamp Quarter, Little Italy, Mission Valley, North Park, Hillcrest, and Marina District.
Zip Codes: 92109, 92107, 92106, 92037, 92118
La Jolla, Pacific Beach, Ocean Beach, Point Loma, Mission Beach, and Coronado hotels and retail centers.
Zip Codes: 92154, 91910, 91911, 91950, 92113
Otay Mesa Cross-Border Logistics, Chula Vista, National City Mile of Cars, and Barrio Logan fabrication shops.
Zip Codes: 92121, 92126, 92130, 92064, 92069, 92025
Sorrento Valley Biotech, Mira Mesa, Carmel Valley, Poway Business Parks, San Marcos, and Escondido.
Zip Codes: 91941, 91942, 92020, 92071, 92120
El Cajon, La Mesa, Santee, Spring Valley, and Allied Gardens warehouse and retail centers.
The two most common causes are worn bottom pivot bearings and blown internal hydraulic seals in the door closer. When continuous foot traffic wears down the pivot pin, the door drops slightly and binds against the aluminum threshold. If the closer is leaking oil, it loses mechanical dampening, causing the door to either slam violently or stop just short of latching. Our technicians can replace pivot pins and install heavy-duty Grade 1 closers on the spot.
Minor adjustments, closer tension tuning, and hinge lubrication usually run between $175 and $350. Heavy-duty commercial door closer replacements, pivot assembly rebuilds, and panic bar repairs average $295 to $750. Larger replacements, such as full storefront aluminum leaves or motorized automatic operators, range from $1,400 to $3,800+. We provide upfront, transparent estimates when you request a quote online or call our team.
We maintain an average arrival window of 45 minutes or less for emergency commercial door calls across San Diego County. Our mobile repair vehicles are fully equipped with universal hardware, pivot sets, panic exit hardware, and temporary board-up materials to secure your commercial property during the very first visit.
Yes. In California, exterior commercial doors must comply with Title 24 opening force restrictions (typically requiring 5 lbs of opening force or less) and provide adequate latch sweep clearance. Additionally, all stairwell and fire-separation doorways must latch positively under NFPA 80 guidelines. Our technicians test and calibrate every installed component to certify full state and municipal compliance.
Do not let a broken glass entrance, jammed panic device, or malfunctioning warehouse bay door disrupt your business. Contact our 24/7 San Diego commercial door specialists for immediate dispatch and same-day repair.
Licensed California Contractor • AAADM Certified • 24/7 Emergency Dispatch